Moisture Balances Manufacturers, Suppliers and Exporters

Moisture Balances (0.001 g - 220 g)

Analytical Balances

A Moisture Balance uses principle of gravimetric moisture measurement also referred as Thermogravimetric or Loss on Drying (LOD). A Moisture Balance implements one of the most precise methods available for moisture determination. Since gravimetric moisture measurement doesn't depend on material, the moisture balance yields much mobility. In fact, gravimetric moisture measurement depends on the sample weight. Initially with the help of precision scale the sample is weighed, later dried and constantly weighed till the sample shows no oscillation in the weight. After the completion of the drying process, the sample's weight is compared to the weight before drying. Weight of the sample during the drying process are counted and final ratio for the sample material is obtained.

The main objective is to heat the sample to that extent by which the material releases moisture without burning. Therefore, the temperature has to be adjusted to make space for the heat tolerance of the sample material. The substantial drying time depends on the moisture content and size of the respective sample.

Moisture Balances (0.001 g - 220 g)

Easy & Fast Moisture Determination.
3 types of Testing Methods:- Manual, Time Programmable, Automatic.
Weighing based on EMFC technique
Moisture range: 0.1% to 100%
Heating by infrared halogen tube heater
Display of time, temperature, weight & percentage moisture
Temperature range upto 200°C (1°C)
RS-232 interface For Connecting to a computer / printer
Data storage upto 50 tests
Moisture measurement: Unit-
% wet base,
% dry base,
dry weight,
% dry to wet weight
10 programmable memory
Graphical backlight LCD for displaying weight, setup parameters, testing parameters & results
Time based moisture loss on the graphical display.
Study of Pattern of Moisture loss by printing/Display on computer screen of online data-elapsed time, present sample weight and percentage moisture loss. Elapsed time interval can be programmed -10,20,30,60 & 120 Seconds

Specifications :

MODELS	CAC-34	CAC-64	CAC-124	CAC-224
CAPACITY	30g	60g	120g	220g
READABILITY	0.0001g	0.0001g	0.0001g	0.0001g
REPEATABILITY (+/-)	0.2mg	0.2mg	0.3mg	0.3mg
LINEARITY (+/-)	0.3mg	0.3mg	0.4mg	0.4mg
PAN SIZE	100mm	100mm	100mm	100mm

Moisture Content :

Accuracy : 0.1% for sample above 5g
(std. dev.) : 0.5% for sample below 5g
Resolution : 0.1%

Moisture Balances (CAL Series) Manufacturers, Suppliers and Exporters

Moisture Balances (0.001 g - 220 g)

Analytical Balances

Contech CAL series Moisture balances employ most modern technology combined with best computing capabilities to produce a very reliable, accurate and fast determination of moisture content in a sample, using parameters.weight loss on drying method. It incorporates a 5" touch screen display to easily enter the testing and other parameters.

Moisture Balances (CAL Series) 0.001g to 180g Manufacturer Supplier and Exporters

Features :

● 3 types of Testing Methods:- Manual, Time Programmable, Automatic.
● Drying using infrared halogen lamp for faster moisture determination.
● Uniform heating due to the reflecting sample chamber.
● Moisture measurement Unit -
  * % Moisture on wet base
  * % Moisture on dry base
  * % dry to wet weight ratio
  * % wet to dry weight ratio
  * % Weight loss in grams
● 5" Touch screen graphic display.
● Real time graph of moisture loss on the display.
● 10 programmable drying methods.
● Storage of 100 test results in memory.
● Admin and ten users for GLP reports.
● Bidirectional RS 232 interface to interface with computers and printers.
● Printing & Display of test results on the completion of the test.
● Programmable periodic printing of moisture % while testing.

Specifications :

Moisture Content :
● Accuracy : 0.05% for sample above 5g
0.1% for sample below 5g
● Resolution : 0.01%
● Temp. range : Ambient to 200 deg C in 1 deg increment
● Timer setting : 3min. to 120min. in 1min. increment.
● End point setting in auto mode : 0.01% per minute to 5% per minute
● Print interval selection : 10, 20, 30, 60, 120 seconds
● Taring Range : Up to full capacity
● Power Req : 230V+10%V AC, 50/60Hz, 550 Watt
● Operating Temperature : 15~50 deg C
● Dimension (mm) : 345 (L) x 185 (W) x 145 (H) when cover is closed.
: 345 (L) x 185 (W) x 300 (H) when cover is open.

Optional Accessories :
● Aluminum sample pan
● Certified standard weights
● Certified temperature kit
● RS 232 to USB convertor
● 21CFR Part 11 / GLP compliant
● Thermal printer / Dot matrix printer

MODELS	CAL-63 (M)	CAL-133(M)	CAL-183(M)
CAPACITY	60g	130g	180g
READABILITY	0.001g	0.001g	0.001g
PAN SIZE	100 mm	100 mm	100 mm

* All Specifications and designs are subject to change for improvement.